Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

速率模式飞轮姿态控制系统飞轮组合平稳切换方法

对速率模式飞轮姿态控制系统的能控性、稳定性和飞轮组合切换过程进行了研究，揭示了在飞轮组合切换过程中引起卫星姿态抖动的原因，提出了通过对残余角动量进行卸载并将卸载函数同时前馈到系统输入的方法，以保持卫星姿态的稳定度。从理论上证明了可引入残余角动量进行卸载，将卸载函数同时前馈到系统输入，并且不改变原系统的能控性和稳定性。给出了某卫星飞轮切换应用实例，说明了飞轮组合平稳切换方法的有效性。     

Estimating inter-system biases for tightly combined Galileo/BDS/GPS RTK

The overlapping carrier frequencies L1/E1, L5/E5a and B2/E5b from GPS/Galileo/BDS allow inter-system double-differencing of observations, which shows a clear advantage over differencing of the observations of each constellation independently. However, the inter-system biases destroy the integer nature of the inter-system double-differencing ambiguities. Two methods of direct rounding and parameter estimation are used to determine the ISB value. By analyzing data collected from Curtin University from 2015 to 2018, the phase and code inter-system bias (ISB) are related to the receiver type, firmware version and the selected overlapping frequency. Upgrade of receiver firmware version results in changes of ISB values. For example, the upgrade of Javad firmware in Dec, 15, 2017 causes the difference of 0.5 cycles ISB between BDS GEO and non-GEO satellites. By comparing the three dynamic models which include white noise process, random walk process, and random constant in the parameter estimation method, the ISB determined by the random constant model is consistent with the value obtained by the direct rounding method. After the calibration of ISBs, the performances of tightly combined positioning are assessed. The success rate of ambiguity resolution and accuracy of positioning for the tight combination (TC) are significantly improved in comparison with that for the loose combination (LC) over short baselines. For L5/E5a, on which only few satellites can be observed, the maximum increase in success rates of ambiguity resolution can reach 31.7%, i.e., from 54.9% of LC to larger than 86.6% of TC, and the positioning accuracies can even be increased by 0.13 m, i.e., from 0.208 of LC to 0.074 m of TC in East direction for the mix-receiver TRIMBLE NETR9-SEPT POLARX4 in 2018.     

轨控大干扰下的系统角动量管理

摘要： 针对利用角动量交换装置系统实现轨控期间姿态维持的情况，研究当轨控推力器存在大力矩扰动时系统角动量管理方法.结合对地运行航天器轨道运动特性，分析轨控干扰力矩的积累角动量变化规律；考虑角动量管理装置系统的角动量存贮容量，基于角动量积累规律提出了一种结合偏置角动量建立与对称分布轨控位置选择的系统角动量管理方法，实现了对称轨控位置积累角动量互相抵消的自平衡效果，极大程度地提高轨控效率且避免系统角动量饱和现象.所提出的方法适用于喷气欠驱动控制系统，方法的有效性通过了数学仿真验证及在轨型号应用.     

无动量干扰的高效率数控扫描系统

无动量干扰的高效率数控扫描系统是环境和灾害监测与预报小卫星红外相机的重要组成部分。文章介绍了这种扫描系统的硬件设计和软件设计。     

基于滚动信息反馈的偏置动量卫星滚动/偏航回路姿态控制器设计

以偏置动量卫星为背景,针对滚动/偏航回路的姿态控制,采用频率分离法分析设计了基于滚动信息反馈的控制器,并给出控制参数的合理选取范围。卫星俯仰回路采用常用的偏置动量轮控制,其滚动/偏航轴上各安装一个反作用飞轮以完成姿态控制。同时,卫星三轴配置磁力矩器以实现动量轮/反作用飞轮的角动量卸载。最后进行了数学仿真,结果表明,卫星滚动/偏航轴的姿态指向控制的精度和稳定度分别达到0.05°和0.001(°)/s,验证了所设计的控制规律的可行性以及控制参数分析的合理性,具有一定的理论意义和工程应用价值。     

飞机风挡透明件的鸟撞分析

 本文研究了风挡透明件鸟撞动力响应的分析模型和方法。考虑了撞击载荷与风挡透明件动力响应的耦合作用和非线性效应。为了能方便地使用现有的非线性有限元分析程序并避免数值解的振荡现象,在研究中不采用常用的拉格朗日法和罚函数法,而是采用动量平衡法。同时,为了避免不断调整撞击接触点和修改网格,本文采用超弹性的橡皮材料来模拟鸟体,而不是象国外那样采用流体柱。研究和比较了衍生动载荷响应解,并提出相应的看法。     

栅极偏压对纳米金刚石薄膜沉积过程的影响

在HFCVD系统中施加栅极偏压和衬底偏压,采用双偏压成核和栅极偏压生长的方法成功制备了高质量的纳米金刚石薄膜.采用显微Raman高分辨率SEM和AFM等现代理化分析手段分析纳米金刚石膜的微结构,结果表明双偏压显著促进了金刚石的成核密度,平均晶粒尺寸在20 nm以内.试验观察和理论分析表明栅极偏压促进了热丝附近的等离子体浓度,提高了衬底附近的碳氢基团和氢原子浓度,提高了金刚石的成核密度、在保持晶粒的纳米尺寸的同时保持了较高的成膜质量和较低的生长缺陷.     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。